Shades of Purple / Periwinkle / How to make periwinkle

How to Make Periwinkle Color

You put out some blue and white, mixed it well and hoped for periwinkle. What's sitting on your palette is a pale sky blue instead.

So what's missing?

A small amount of magenta, and the right blue to begin with. Below is the confirmed recipe for periwinkle #CCCCFF, the reason blue and white alone stops short, and how to fix a batch that came out wrong.

Key Takeaways

  • Our Confirmed periwinkle mixes Titanium White, Ultramarine Blue and Quinacridone Magenta at 6:2:1 by volume.
  • White and blue on their own stop at a pale blue, so a small part of magenta does the real work.
  • Ultramarine already leans toward violet, while a green-leaning blue like Primary Blue pulls the mix toward sky blue.
  • The recipe aims at periwinkle #CCCCFF, a very light purplish blue, not the deeper Periwinkle Purple #BE93E4.
  • Too much magenta tips periwinkle toward purple, and too much blue tips it toward cornflower blue.
  • Acrylic dries a little darker as its binder clears, so judge your periwinkle on a dried swatch.

What colors make periwinkle

The confirmed recipe to make periwinkle is 6 parts Titanium White, 2 parts Ultramarine Blue and 1 part Quinacridone Magenta. The ratio is measured by volume, so 6 parts means 6 portions of the same size, like careful tube squeezes or scoops from a pile of white paint on your palette. That's 9 parts in all, and 6 of them are white.

Tube chips show each paint straight from the tube. Ratio in parts by volume.

TubesRatio (by volume)Status
Titanium White + Ultramarine Blue + Quinacridone Magenta6:2:1Confirmed

The target is #CCCCFF, the screen version of periwinkle:

Screen reference, not a paint target.

Confirmed means confirmed through research and testing. Still, mix a small test before it goes anywhere near a painting. All 3 tubes are Liquitex BASICS names, so if your box says something else, match the pigment codes on the label. Look for PW6 on the white, PB29 on the blue and PR122 on the magenta.

There are other ways to reach periwinkle, and they're in our purple recipes. This page sticks to these 3 tubes.

Periwinkle is violet in a lot of white

The blue and the magenta go in at 2 parts to 1, the same pair and the same ratio as our violet recipe, so periwinkle is really a blue-leaning violet spread through a lot of white.

Which periwinkle this recipe makes

This recipe aims at #CCCCFF. Wikipedia's periwinkle page files that hex as a "very light purplish blue" and gives lavender blue and light blue violet as other names for the same color. Periwinkle Purple is deeper and leans further toward purple, and it has its own page.

Some guides, like Notebook and Penguin, list periwinkle as #8E82FE, a much deeper blue-violet that this recipe isn't aimed at.

Why blue and white alone isn't periwinkle

Blue and white make a pale blue, and the small part of magenta is what turns it into periwinkle. Periwinkle sits between blue and violet on the color wheel, so it needs a touch of red, and the magenta is where that red comes from.

A tiny drop of pink or red is the usual fix when periwinkle comes out too blue. The blue you start with decides how much magenta you'll need.

Which blue to use

Use Ultramarine Blue. It already leans toward violet, and a guide to mixing clean violet says it plainly: "Ultramarine is a violet-blue." With white, it gets you most of the way to periwinkle, and the magenta finishes the job.

A blue that leans green does the opposite. Primary Blue in the Liquitex BASICS range is PB15:3, a phthalo blue, and with white it heads toward Sky Blue #87CEEB. On a screen, sky blue sits at hue 197 and periwinkle at 240, so the magenta has much further to pull it, and pushing a green-leaning blue that far is how a mix turns gray.

Why white makes periwinkle chalky

White does more than lighten. A painter on WetCanvas put it this way: "When I add white, it doesn't just make a color lighter, it also makes it cooler, duller and pastel/chalky looking."

Periwinkle is 6 parts white out of 9, so it sits right at that edge. If yours looks chalky, stop adding white and fold in a touch more Ultramarine, then a touch of magenta.

The pink-first method

Most of the written guides for this search tell you to mix red and white into pink first, then add blue. That works when the red leans toward blue, like a magenta does. A red that leans orange carries a little yellow, and yellow pulls a violet mix toward gray. That's why this recipe names Quinacridone Magenta.

How to mix periwinkle step by step

The recipe goes together in small steps, because you can always add more color but you can't take it back out.

  1. Put out 6 parts Titanium White first.
  2. Add Ultramarine Blue a little at a time, up to 2 parts, until you have a clean pale blue.
  3. Add Quinacridone Magenta last, in small amounts, up to 1 part, and watch the blue tip into periwinkle.
  4. Mix with a palette knife until no streaks are left.
  5. Brush a test swatch and let it dry fully before you judge it.

The magenta goes in last because it's the strongest of the 3 tubes. A pinhead of it can take over a whole mix, so small amounts let you see each change.

Judge the dry swatch, not the wet paint

A painter on WetCanvas described a problem most of us know: "Highlights and contrasts seem to disappear often and they considerably darken to an extent it is hard to anticipate."

The binder is the cause. Golden explains that it looks milky when wet and clears as it dries, which darkens the color. Golden notes the shift shows more in dark colors like Ultramarine Blue than in light ones, so a pale periwinkle moves less. Mix a step lighter anyway, and let the dry swatch decide.

#CCCCFF is a screen color, too, so use it as a reference point and trust the dried swatch.

Make the same periwinkle again

Keep a note with the ratio in parts and the 3 pigment codes, and tape a dried swatch beside them so the next batch has something real to match.

How to fix a periwinkle that went wrong

You can fix almost any periwinkle with a touch of 1 of the 3 tubes already on your palette. Go slowly, because as a painter on WetCanvas found, each extra color "easily turns into a mud/neutral." Find what you see in the left column.

What you seeWhyFix
Pale sky blue, no violet in itlooks like Sky BlueNot enough magenta, or a green-leaning blueAdd a touch of Quinacridone Magenta
Too pink, heading toward lilaclooks like Periwinkle PurpleToo much magentaAdd a touch of Ultramarine Blue
Too dark, heading toward cornflower bluelooks like Cornflower BlueToo much blueAdd white a little at a time
Pale and chalkylooks like Lavender GrayToo much whiteAdd a touch of Ultramarine, then a touch of magenta
Gray or muddylooks like GrayAn orange-leaning red, black, or a 4th pigmentStart again with the 3 tubes
Dried darker than it looked wetThe acrylic binder cleared as it driedMix the next batch a step lighter

Pull it bluer

A touch of Ultramarine pulls periwinkle toward Cornflower Blue #6495ED, a deeper blue. Add it a little at a time and judge each step dry.

Our periwinkle vs cornflower blue page shows how close those 2 colors really are.

Pull it more violet

A touch of magenta pulls it toward Periwinkle Purple #BE93E4. Keep the blue ahead of the magenta, though, because too much magenta carries it past purple toward eggplant.

Lighten it toward lavender

More white moves periwinkle toward Lavender #E6E6FA. On a screen the 2 colors share the same hue, 240, and lavender is lighter and softer. Our periwinkle vs lavender page lays them side by side, and if lavender is what you're after, it has its own recipe.

Keep exploring

Periwinkle is mostly white, and its color comes from a blue that already leans violet plus a small part of magenta added last. Start with Ultramarine and the magenta only has a short way to go.

We got to this recipe the long way, through a lot of trial and error. Some colors came together fast. Others didn't, and a few recipes we found published were completely wrong, so we check every ratio against the others before we trust it. The thing most beginners don't see coming is how different a color looks wet and dry. That's why each recipe in our catalog carries a status, and so far 641 of the 3,275 are Confirmed, this periwinkle included. Start with our 25 free colors, or open the full purple recipes.

With your periwinkle mixed, let's explore the colors that look best beside it.

Color mixing guide
25 free acrylic paint recipes

Mix all 25 colors from just 8 tubes. Each recipe tells you which tubes to use and how many parts of each. For coral, that's 2 parts red to 1 part white.

You'll get the recipes and our emails, and you can unsubscribe anytime.

FAQ

Is there a periwinkle paint in a tube? Not quite, but 1 tube comes close. Liquitex says its Light Blue Violet "can also be described as a periwinkle," and Wikipedia lists "light blue violet" as another name for periwinkle. Straight from the tube it's darker than #CCCCFF, with a swatch of #7E8FC4, so it needs white to get there. The recipe above is the route we use.

Can you make periwinkle from primary colors? Yes, as long as your primaries lean the right way. Liquitex's Primary Blue, for example, is PB15:3, a phthalo that leans green, so it pulls toward sky blue and needs more red to reach periwinkle. Pick a red that leans toward blue, like a magenta, and add the color into a lot of white a little at a time.

How do you mix periwinkle in watercolor? Let the water and the white paper do the job of white paint. A thin wash of Ultramarine with a touch of magenta gives you periwinkle on the page. Ultramarine also granulates, settling into a fine grainy texture as it dries. That texture suits a sky or a petal but not every painting, so try it on scrap first.

How do you make a darker periwinkle? Use less white, and keep the blue ahead of the magenta as you go. That gives you a deeper periwinkle without losing the blue that makes it periwinkle. Black is the wrong tool here, because it dulls the color and shifts the hue, so a periwinkle darkened with black tends to look gray.